Sealed Chambers 高分辨率密封室現貨

Sealed Chambers 高分辨率密封室現貨

Ultra-Thin Sealed Imaging Chamber for 25mm Coverslips UTIC
The chamber is formed by putting a thin spacer between two 25mm coverslips. The minimum thickness is
150 micron. You can change thickness by using a number of spacers. The inside opening is 21mm. Smaller
openings are available upon request The adhesive gaskets form sealed chambers if used with smooth
surfaces, even with cell media on top. The adhesive is easy to remove after use. Procedure: put the
coverslip into the holder; remove one protective layer from adhesive gasket; position the gasket above the
coverslip; remove the second protective layer; put your sample inside the opening; cover with the second
coverslip. These ultra-thin chambers can be used with heated chambers and regular glass slides. Can be
used with oil-immersion optics and for multi-photon imaging.. Item#: UTIC-21, UTIC-13
• Optical clearance: 21, 20, 13 mm • Thickness: 150 micron
• Working volume: 52, 47, 20 microl

用于25毫米蓋玻片的超薄密封成像室

腔室是通過在兩個25毫米蓋瓦之間放置一個薄墊片形成的。小厚度為

150微米。可以使用多個墊片來更改厚度。內部開口為21mm。較小的

如有要求，可提供開口。如果使用光滑的膠粘墊圈，則可形成密封室

表面，即使上面有手機媒體。這種粘合劑使用后很容易去掉。程序：放置

蓋滑入保持架；從粘合墊圈上拆下一層保護層；將墊圈放在

蓋玻片；去掉第二層保護層；把樣品放在開口內；用第二層覆蓋

床單。這些超薄的腔室可以與加熱腔室和普通的玻璃載玻片一起使用?？梢允?/p>

用于浸油光學和多光子成像。。項目#：UTIC-21，UTIC-13

•光學間隙：21、20、13 mm•厚度：150微米

•工作容積：52、47、20微升

 注：楊清辰發布