您好, 歡迎來到化工儀器網
產品分類品牌分類
-
離心機 凝點傾點測試儀 開口閃點測定儀 閉口閃點測定儀 運動粘度測定儀 微量水分測定儀 界面張力測定儀 變壓器油氣相色譜儀 脫氣振蕩儀 絕緣油體積電阻率測定儀 自燃點測定儀 空氣釋放值測定儀 氧化安定性測定儀 潤滑油泡沫特性測定儀 抗乳化性能測定儀 腐蝕銹蝕測定儀 絕緣油耐壓測試儀 水溶性酸及堿測定儀 汽油辛烷值測定儀 抽油機多用表 實際膠質測定儀 恩氏粘度 蒸餾測定儀 密度測定儀 硫含量測定儀 潤滑脂滴點測定儀 灰分測定儀 苯胺點測定儀 低溫測定儀 殘?zhí)繙y定儀 石油蠟含油量測定儀 鹽含量測定儀 烴類測定儀 萘結晶點測定儀 色度測定儀 蒸汽壓測定儀 機械雜質測定儀
產品簡介
詳細介紹
| 一、全自動閉口閃點儀概述 二、全自動閉口閃點儀適用標準及適用范圍 三、全自動閉口閃點儀主要技術指標和參數 五、全自動閉口閃點儀儀器成套性 1、全自動閉口閃點儀儀器成套
| ||||||||||||||||||||||||||||
I. Summary
The instrument is used to determine closed cup flash point of petroleum products. The instrument adopts colored LCD screen, man machine conversation interface, blank buttons, open and fuzzy controlled integration software, and modular structure. It can preset temperature, sample ID, barometric pressure, test date, and other parameters. It has prompt menu and input guide. The instrument is automatic, convenient, and rapid. It can meet the requirements of the National Standard of People’s Republic of China GB/T261-2008 “Test Methods for Flash Point of Petroleum Products （Pensky-Martens Closed Cup Method）”. It is the best choice of similar products. It can be widely used in the field of railway, aviation, power plant, petroleum industry, and scientific research institutes.
II. Purpose and scope
The instrument is designed and made as per the National Standard GB/T261-2008 “Test Methods for Flash Point of Petroleum Products （Pensky-Martens Closed Cup Method）”. It is suitable to determine closed cup flash point of petroleum products, which is expressed as the lowest temperature when the mixture of its vapor and air contacts flame and appears flash, using a closed oil cup under the stipulated condition.
III. Main technical specification and parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Temperature measurement:
（1） Full scale: room temperature～350℃;
（2） Repeatability: ≤2℃;
（3） Reproducibility: ≤4℃;
（4） Resolution: 0.1 ℃;
（5） Accuracy: 0.5%;
3. Basic parameters:
（1） Temperature rising speed: as per GB/T261-2008;
（2） Ignition mode: Electron device for ignition; gas flame for flame application;
4. Working environment:
（1） Ambient temperature: 10～40℃;
（2） Relative humidity: ≤80％;
5. Total power consumption: not more than 300 W;
IV. Working principle
Fill sample in the test cup, and heat the test cup containing sample on the instrument as per the requirements of the National Standard GB/T261-2008. The flash point is expressed as the lowest temperature when the mixture of sample vapor and air contacts flame and appears flash.
The controlling system can send orders through I/O port as per the collected temperature changes to control the heater, so that the sample temperature will increase at a certain rate. The
V. Full set and technical documents
1. Full set
| No. | Name | Unit | Quantity |
| 1 | Main unit | Set | 1 |
| 2 | Oil cup | Piece | 1 |
| 3 | Power supply wire （250V 6A） | Piece | 1 |
| 4 | Printing paper | Roll | 1 |
2. Technical documents
（1） Operation Manual 1 piece
（2） Quality Certificate 1 piece
（3） Repair Guarantee 1 piece
flame application interval, flame application time, and flash detection can be automatically controlled. When a flash is detected, the controlling system will stop collecting data. Then the instrument will show flash point value and print out test results. The heater will stop working, the flame is extinguished, and the test arm is automatically raised up. The test is over.
