欧美……一区二区三区,欧美日韩亚洲另类视频,亚洲国产欧美日韩中字,日本一区二区三区dvd视频在线

 計量?jī)x器儀表中英文對照表

61齒輪漸開線樣板the involute master of gear

62齒輪螺旋線樣板the helix master of gear

63矩形花鍵量規gauges for straight–sided splines

64測量蝸桿master worm

65測齒儀universal gear measuring instrument

66漸開線檢查儀universal involute measuring instrument

67齒輪齒距測量?jī)xgear circular pictchmeasuring instrument

68齒輪測量機Universal gear measuring machine

69齒輪螺旋線測量?jī)xgear helix measuring instrument

70便攜式齒輪齒距測量?jī)xmanual gear circular pitch measuring instrument

71便攜式齒輪基節測量?jī)xmanual gear base pitch measuring instrument

72立式滾刀測量?jī)xvertical hob measuring instrument

73齒輪雙面嚙合綜合測量?jī)xGear dual-flank measuring instrument

74齒輪單面嚙合整體誤差測量?jī)xGear single-flank meshing integrated error measuring instrument

75梯形螺紋量規gauges for metric trapezoidal screw threads

76工作螺紋量規work gauges for metric trapezoidal screw threads

77校對螺紋量規check gauges for metric trapezoidal screw threads

78.梯形螺紋量規型式與尺寸Types and dimensions of metric trapezoidal screw threads

79.普通螺紋量規型式與尺寸Types and dimensions of gauges purpose screw threads

80.非螺紋密封的管螺紋量規Gauges for pipe threads prcessure-tight joints are not made on the threads

81.螺紋千分尺Screw thread micrometer

82.zui大允許誤差maximum permissible error

83.間隙螺紋量規Clearance screw gauge

84.量針Bar gauge

85.螺紋樣板Screw thread template

86.用螺紋密封的管螺紋量規Gauges for pipe threads where pressure-tight joints are made on the threads

87.刀具預調測量?jī)x精度Accuracy of the presetting instrument

88.薄膜式氣動量?jī)xMembrane type pneumatic measuring instrument

89.光柵線位移測量系統Grating linear displacement measuring system

90.光柵角位移測量系統Grating angular displacement measuring system

91.磁柵線位移測量系統Magnet-grid linear displacement measuring system

92.量塊附件Accessories for gauge blocks

93.V形架Vee blocks

94.比較儀座Comparator stand

95.磁性表座Magnetic stand

96.表座Universal stand for dial indicator

1.刀口型直尺:knife straigjht edge

2.刀口尺: knife straigjht edge

3.三棱尺three edges straigjht edge

4.四棱尺four edges straigjht edge

5.條式和框式水平儀bar form and square levels

6.合像水平儀imaging level meter

7鑄鐵平板cast iron surface plate

8.巖石平板granite surface plate

9.鑄鐵平尺cast iron straigjht edge

10.鋼平尺和巖石平尺steel and granite straigjht edge

11.圓度儀roundness measuring instrument

12.電子水平儀electronic level meter

13.表面粗糙度比較樣塊鑄造表面roughness comparison specimens cast surface

14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面roughness comparison specimens-groundturnedboredmilledshape and planed

15.表面粗糙度比較樣塊電火花加工表面roughness comparison specimens spark-erostion machining surfaces

16.表面粗糙度比較樣塊拋光加工表面roughness comparison specimens pollshed surfaces

17.接觸式儀器的標稱特性

18.輪廓profiles

19.軌跡輪廓traced profile

20.基準輪廓reference profile

21.總輪廓total profile

22.原始輪廓primary profile

23.殘余輪廓residual profile

24.觸針式儀器stylus instrument

25.感應位移數字存儲觸針式量?jī)xdisplacement sensitivedigitally storing stylus instrument

26.觸針式儀器的部件stylus instrument components

27.測量環measurement loop

28.導向基準renfence guide

29.驅動器drive unit

30.測頭（傳感器） probe（pick-up）

31.拾取單元tracing element

32.針尖stylus tip

33.轉換器transducer

34.放大器amplifier

35.模/數轉換器analog-to-digital converter

36.數據輸入data input

37.數據輸出data output

38.輪廓濾波和評定profile filtering and evaluation

39.輪廓記錄器profile recorder

40.儀器的計量特性metrological characteristics of the instrument

41.靜測力的變化change of static measuring force

42.靜態測力static measuring force

43.動態測量力dynamic measuring force

44.滯后hysteresis

45.測頭的測量范圍transmission function for the sine waves

46.儀器的測量范圍measuring range of the instrument

47.模數轉換器的量化步距quantization step of the ADC

48.儀器分辨力instrument resolution

49.量程分辨力比range-to-resolution ratio

50.測頭線性偏差probe linearity deviation

51.短波傳輸界限short-wave transmission limitation

52.輪廓垂直成分傳輸vertical profile component transmission1

53表面粗糙度比較樣塊拋丸、噴砂加工表面roughness comparison specimens shot blasted and blasted surfaces

54產品結構幾何量計術規范（GPS）geometrical product specifications（GPS）

55表面結構surface texture

56接觸式儀器的標稱特性nominal characteristics of contact instruments

57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth

58zui大允許誤差maximum permissible error

59圓柱直齒漸開線花鍵量規gauges for straight cylindrical involute splines

60齒厚游標卡尺Gear tooth vernier calipers