69036-60 瓊脂凝膠打孔器
參考價 | ¥ 150 |
訂貨量 | ≥1 |
具體成交價以合同協議為準
- 公司名稱 北京祥云興業科技有限公司
- 品牌
- 型號 69036-60
- 產地 美國harris
- 廠商性質 經銷商
- 更新時間 2015/12/7 16:59:05
- 訪問次數 3479
產品標簽
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
主營產品/服務:物理分析儀器;實驗室常規設備;電化學水質;色譜分析儀器;環境監測儀器;光學分析儀器;氣體檢測儀器;塑料耗材;生命科學儀器;基礎儀表;藥典藥檢儀器;顯微鏡/放大鏡;箱類溫度器材;涂裝儀器;電子生產設備;玻璃器皿;通訊測量儀器;安全防護;量具量儀;石化專用儀器;電子電氣儀器;生物醫學相關儀器耗材,試劑;
瓊脂凝膠打孔器
組織或者截取微細部位樣品的得力幫手。
- 法醫學應用-打孔取材,從現場保存帶回,對于一些源材料,諸如紙張、膠片、布料、樹葉、漆片、薄膜等可以直接取出*芯樣
- 電生理學的應用-在快速分裂前的離散區域取樣進行批記錄
- 藥理學的應用-可以在大腦不同區域取樣以便檢測其神經傳導和代謝產物變化(對藥物試劑的反應)
- 解剖學的應用以及電子顯微鏡方面的應用也很廣泛
一、打孔器(Harris Uni-Cores)
多用途,適合較軟目標取樣的的工具(挖取凝膠就可以用此產品啦),由塑料PP制造,器體中空,內置一帶由鋒利周緣的打孔頭,還有樣品從打孔頭內打出的彈射裝置。此產品單獨無菌包裝,可以一次性使用,也可以用乙醇浸泡打孔頭,在250華氏溫度下煮30分鐘,加壓14磅/平方英寸再接著使用。

貨號 | 品名 | 包裝 | 價格 |
69036-05 | Harris Uni-Core™, Size 0.5mm | each | 0.00 |
69036-07 | Harris Uni-Core™, Size 0.75mm | each | 0.00 |
69036-10 | Harris Uni-Core™, Size 1.0mm | each | 0.00 |
69036-12 | Harris Uni-Core™, Size 1.25mm | each | 0.00 |
69036-20 | Harris Uni-Core™, Size 2.0mm | each | 0.00 |
69036-25 | Harris Uni-Core™, Size 2.5mm | each | 0.00 |
69036-30 | Harris Uni-Core™, Size 3.0mm | each | 0.00 |
69036-35 | Harris Uni-Core™, Size 3.5mm | each | 0.00 |
69036-40 | Harris Uni-Core™, Size 4.0mm | each | 0.00 |
69036-50 | Harris Uni-Core™, Size 5.0mm | each | 0.00 |
69036-60 | Harris Uni-Core™, Size 6.0mm | each | 0.00 |
69036-70 | Harris Uni-Core™, Size 7.0mm | each | 0.00 |
69036-80 | Harris Uni-Core™, Size 8.0mm | each | 0.00 |
二、Harris微型取樣器(Harris Micro-Punch)
打孔頭和活塞式打孔管均由高度440c不銹鋼制造,打孔頭經過熱處理達到Rockwell硬度Rc-58,打孔頭周緣經過打磨鋒利無比,經得起*使用。打孔頭的規格有:0.5mm,1.0mm,1.2mm,2.0mm,3.0mm。長度140mm,滅菌溫度可耐180度。


貨號 | 品名 | 包裝 | 價格 |
69034-05 | Harris Micro-Punch, 0.5mm | each | 2500.00 |
69034-10 | Harris Micro-Punch, 1.0mm | each | 2500.00 |
69034-12 | Harris Micro-Punch, 1.2mm | each | 2500.00 |
69034-20 | Harris Micro-Punch, 2.0mm | each | 2500.00 |
69034-30 | Harris Micro-Punch, 3.0mm | each | 2500.00 |
69035-05 | Replacement Tip, 0.5mm | each | 0.00 |
69035-10 | Replacement Tip, 1.0mm | each | 0.00 |
69035-12 | Replacement Tip, 1.2mm | each | 0.00 |
69035-20 | Replacement Tip, 2.0mm | each | 0.00 |
69035-30 | Replacement Tip, 3.0mm | each | 0.00 |
使用方法:
1. For most forensic samples, position source of materials (i.e. blood cards, paint chips, paper, leaves, gels, etc.) on the self-healing cutting mat. Remove the protective cover cap from the punch. Firmly grip the punch. The tip is then positioned at a right angle above the target area – DO NOT DEPRESS THE PLUNGER. The tip is pushed downward into the source material until it makes contact with the cutting mat. Lift the Harris Micro-Punch™ away from the source material with the cored sample stored in the cutting tip.
2. For most biology samples – Typically tissue to be punched is first sliced into 1-2mm thick sections. The section to be punched is then placed on a saline-soaked filter paper disc on an ice-cold dissection plate ,Then follow the above procedure.
樣品的保存與彈出:
After coring, the sample is temporarily stored in the hollow cutting tip ready for the preferred ejection. The Harris MicroPunch™ can be rested on its side without loss of sample from the hollow tip. To eject sample, position tip over target area and depress plunger.
清洗:
Clean the tip between each sample extraction by coring blank filter paper, rinsing with ethanol or spraying with compressed air to remove dried artifacts. Rinse mat with ethanol after each sample extraction.